Metrohm NIRS DS2500 Analyzer Bedienungsanleitung

NIRS DS2500 AnalyzerManual8.922.8001EN / 2014-07-10

1.2 Intended use￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2￭￭￭￭￭￭￭￭1.2 Intended useThe NIRS DS2500 Analyzer is designed for use in production facilities. Itcan be used f

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭1 Introduction￭￭￭￭￭￭￭￭3WARNINGThis symbol draws attention to a possible hazard dueto heat or hot instrument parts.WARNINGThis sy

1.4 Safety instructions￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4￭￭￭￭￭￭￭￭WARNINGNever open the housing of the instrument. The instrument could bedamaged by this. There i

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 Overview of the instrument￭￭￭￭￭￭￭￭52 Overview of the instrument2.1 FrontFigure 1 Front NIRS DS2500 Analyzer1Cover2Sampling w

2.2 Rear￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭6￭￭￭￭￭￭￭￭2.2 RearFigure 2 Rear NIRS DS2500 Analyzer1On/off switchFor switching the instrument on and off.2Fuse holder3P

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 Installation￭￭￭￭￭￭￭￭73 Installation3.1 Unpacking and inspecting the instrument3.1.1 PackagingThe instrument is supplied in

3.3 Connecting the power supply cable￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭8￭￭￭￭￭￭￭￭NOTEProblems during calibration/measurementIf the expected results are not obtaine

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 Installation￭￭￭￭￭￭￭￭9 3Plug the cable of the power supply unit into the power socket andtighten it. 4Plug the power supply cab

3.4 Connecting the data cable￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭10￭￭￭￭￭￭￭￭3.4 Connecting the data cableTo be controlled, the NIRS DS2500 Analyzer is connected to

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 Installation￭￭￭￭￭￭￭￭11 3Connect the other end of the data cable to the computer's networkcable connector.3.5 Switching o

3.6 Initial start-up￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭12￭￭￭￭￭￭￭￭3.6 Initial start-upThe initial start-up of the instrument is always carried out with the Visions

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 Installation￭￭￭￭￭￭￭￭13The metal pin on the sample cup holder must go into the indentationon the sampling window. 2￭ In the sof

3.6 Initial start-up￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭14￭￭￭￭￭￭￭￭ 3￭ In the software, start Reference Standardization. Follow theinstructions in the software.￭ Whe

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 Installation￭￭￭￭￭￭￭￭153.7 Setting up accessoriesMetrohm supplies various sample cups for your NIRS DS2500 Analyzer:Samples Sa

3.7 Setting up accessories￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭16￭￭￭￭￭￭￭￭3.7.2 Inserting the sample cup for powdersUse the NIRS mini sample cup with disposable back

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 Installation￭￭￭￭￭￭￭￭173.7.3 Inserting the sample cup for liquid samplesInserting the sample cup for liquid samplesRequired ac

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭18￭￭￭￭￭￭￭￭4 ControlThe NIRS DS2500 Analyzer is operated with the Vision software.You can find more information on working with

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 Operation￭￭￭￭￭￭￭￭195 OperationThe NIRS DS2500 Analyzer requires appropriate care. Excess contamina-tion of the instrument may

6.1 Maintenance by Metrohm Service￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭20￭￭￭￭￭￭￭￭6 Maintenance6.1 Maintenance by Metrohm ServiceMaintenance of the NIRS DS2500 Anal

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭6 Maintenance￭￭￭￭￭￭￭￭21WARNINGElectric shockThere is a danger of life-threatening electric shock if an instrument con-nected to

Metrohm AGCH-9100 HerisauSwitzerlandPhone +41 71 353 85 85Fax +41 71 353 89 [email protected] DS2500 AnalyzerManual8.922.8001EN /

6.2 User maintenance￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭22￭￭￭￭￭￭￭￭ 3Removing the lamp holder￭ Push the white lamp holder approx. 2 mm inwards,￭ then turn it about 4

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭6 Maintenance￭￭￭￭￭￭￭￭23 4Disconnecting the cablesCAUTIONFunctional disruptionDo not loosen the screw terminals of the black cabl

6.2 User maintenance￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭24￭￭￭￭￭￭￭￭ 5Removing the lamp from the holder￭ Hold the lamp by the reflector.￭ Lift the lamp holder off the

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭6 Maintenance￭￭￭￭￭￭￭￭25CAUTIONDamage to the lampFingerprints and greasy deposits may damage the lamp.Do not touch the glass part

6.2 User maintenance￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭26￭￭￭￭￭￭￭￭￭ Guide the lamp cables through the rectangular opening of thelamp holder.￭ Place the lamp holder

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭6 Maintenance￭￭￭￭￭￭￭￭27 4Inserting the lamp holder￭ First, push the white lamp holder carefully all the way into theopening,￭ th

6.2 User maintenance￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭28￭￭￭￭￭￭￭￭6.2.2 Replacing the fan filterThe fan filter has to be checked at least once a month. If the inst

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭6 Maintenance￭￭￭￭￭￭￭￭29 4Cleaning the filter￭ Blow out the dirty filter with a compressed air duster spray.￭ Alternative: Rinse

6.2 User maintenance￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭30￭￭￭￭￭￭￭￭6.2.3 Replacing the fusesThe fuse is located on the rear of the instrument, directly underneath t

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭6 Maintenance￭￭￭￭￭￭￭￭31 3Inserting the new fuse￭ Insert a new fuse of the same type into the holder.￭ Place the fuse holder back

TeachwareMetrohm AGCH-9100 [email protected] documentation is protected by copyright. All rights reserved.Although all the information

7.1 Malfunction during start-up￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭32￭￭￭￭￭￭￭￭7 Troubleshooting7.1 Malfunction during start-upProblem Cause RemedyThe instrument do

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭8 Technical specifications￭￭￭￭￭￭￭￭338 Technical specifications8.1 InterfacesEthernet connec-tion socketEthernet connector for

8.5 Safety specifications￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭34￭￭￭￭￭￭￭￭Wavelength preci-sionBased on oneinstrument< 0.005 nmBased on aninstrumentgroup< 0.02 n

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭8 Technical specifications￭￭￭￭￭￭￭￭358.7 DimensionsDimensionsLength 490 mmWidth 375 mmHeight 300 mm (closed)534 mm (opened)Weigh

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭36￭￭￭￭￭￭￭￭9 Warranty (guarantee)Metrohm guarantees that the deliveries and services it provides are free ofdefects in materials

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭9 Warranty (guarantee)￭￭￭￭￭￭￭￭37The same warranty periods that are specified for a corresponding newpart apply to parts that are

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭38￭￭￭￭￭￭￭￭10 AccessoriesUp-to-date information on the scope of delivery and optional accessoriesfor your instrument can be found

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭10 Accessories￭￭￭￭￭￭￭￭39The Partslists webpage will be displayed. 7Select the desired output language. 8With the article number

Index￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭40￭￭￭￭￭￭￭￭IndexAAccessoriesSet up ... 15DData connectionEstablish ...

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭Table of contents￭￭￭￭￭￭￭￭IIITable of contents1 Introduction 11.1 Instrument description ...

Table of contents￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭IV￭￭￭￭￭￭￭￭6.2 User maintenance ... 206.2.1 Replacin

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭Table of figures￭￭￭￭￭￭￭￭VTable of figuresFigure 1 Front NIRS DS2500 Analyzer ...

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭1 Introduction￭￭￭￭￭￭￭￭11 IntroductionThis manual gives you a comprehensive overview of the installation andmaintenance of the N