Metrohm 856 Conductivity Module Bedienungsanleitung PDF herunterladen (Seite 27)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

3 Installation

856 Conductivity Module

￭￭￭￭￭￭￭￭

Operation with Touch Control

Connect the balance as follows:

Plug in the USB plug of the USB/RS-232 adapter at the USB connec-

tor of the 856 Conductivity Module.

Connect the RS-232 interface of the USB/RS-232 adapter with the

RS-232 interface of the balance (see table for cable).

Switch on the Touch Control.

Switch on the balance.

Activate the RS-232 interface of the balance if necessary.

Configure the RS-232 interface of the USB/RS-232 adapter in the

device manager of the Touch Control (see Touch Control manual).

3.4.5 Connecting a PC keyboard (only for operation with Touch Con-

trol)

The PC keyboard is used as an aid for text and numerical input.

Connect the PC keyboard as follows:

Insert the USB plug of the keyboard into one of the USB sockets of

the 856 Conductivity Module.

Switch on the Touch Control.

The keyboard is recognized automatically and entered in the device

manager.

Configure the keyboard in the device manager of the Touch Control

(see Touch Control manual).

3.4.6 Connecting a barcode reader

The barcode reader is used as an aid for text and numerical input. You can

connect a barcode reader with USB interface.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

Keine Kommentare

Metrohm 856 Conductivity Module Bedienungsanleitung Seite 27