Metrohm 905 Titrando Bedienungsanleitung PDF herunterladen (Seite 21)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

3 Installation

905 Titrando

￭￭￭￭￭￭￭￭

6.2151.000

Figure 5 Connecting the computer

The instrument is recognized. Depending on the version of the Win-

dows operating system used, the driver installation proceeds differ-

ently afterwards. Either the necessary driver software is installed

automatically or an installation wizard is started.

Follow the instructions of the installation wizard.

The "On" LED on the 905 Titrando lights up when the driver installa-

tion has been completed and the instrument is ready for operation.

If problems should occur during installation, contact your company's IT

support team.

NOTE

The plug on the instrument end of the 6.2151.000 controller cable is

protected against accidental disconnection by means of a pull-out pro-

tection feature. If you wish to pull out the plug, you will first need to

pull back the outer plug sleeve marked with arrows.

Registering and configuring the instrument in the PC soft-

ware

The instrument must be registered in the configuration of your PC soft-

ware. Once that has been done, you can then configure it according to

your requirements. Proceed as follows:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 54 55

Keine Kommentare

Metrohm 905 Titrando Bedienungsanleitung Seite 21