Metrohm 890 Titrando Bedienungsanleitung PDF herunterladen (Seite 18)

3.2 Connecting a controller

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

￭￭￭￭￭￭￭￭

890 Titrando

3.2.1.1 Connecting a Touch Control

NOTE

The plug is protected against accidental disconnection of the cable by

means of a pull-out protection feature. If you wish to pull out the plug,

you will first need to pull back the outer plug sleeve marked with

arrows.

Connect the Touch Control as follows:

￭ Insert the plug of the Touch Control connection cable into the

Controller socket.

Figure 4 Connecting the Touch Control

￭ Connect the MSB devices (see Chapter 3.3, page 13).

￭ Connect the USB devices (see Chapter 3.4, page 17).

￭ Connect the Titrando to the power supply.

￭ Switch on the Touch Control.

The Touch Control power supply is supplied through the Titrando.

Automatic system tests are performed on both instruments at the

time of activation. The On LED on the front of the Titrando lights up

when the system test has been completed and the instrument is

ready for operation.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 49 50

Keine Kommentare

Metrohm 890 Titrando Bedienungsanleitung Seite 18