Metrohm 803 Ti Stand Bedienungsanleitung PDF herunterladen (Seite 11)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

1 Introduction

803 Ti Stand

￭￭￭￭￭￭￭￭

Warning

Never open the housing of the instrument. The instrument could be

damaged by this. There is also a risk of serious injury if live components

are touched.

There are no parts inside the housing which can be serviced or replaced

by the user.

Protection against electrostatic charges

Warning

Electronic components are sensitive to electrostatic charges and can be

destroyed by discharges.

Always pull the mains cable out of the mains connection socket before

connecting or disconnecting electrical appliances on the rear panel of

the instrument.

1.3.3 Working with liquids

Caution

Periodically check all system connections for leaks. Observe the relevant

regulations in respect to working with flammable and/or toxic fluids

and their disposal.

1.3.4 Flammable solvents and chemicals

Warning

All relevant safety measures are to be observed when working with

flammable solvents and chemicals.

￭ Set up the instrument in a well-ventilated location (e.g. laboratory

flue).

￭ Keep all sources of flame far from the workplace.

￭ Clean up spilled fluids and solids immediately.

￭ Follow the safety instructions of the chemical manufacturer.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Keine Kommentare

Metrohm 803 Ti Stand Bedienungsanleitung Seite 11